How to Make an Upcycled Bottle Cap Table!

My husband has been saving bottle caps for as long as I’ve known him, saying that someday he planned to make something out of them. He wasn’t sure what it would be, and the bottle caps kept accumulating. Inspired by the colorful collection, I decided to turn them into a practical gift for him. And given the volume of caps, I thought it would be good to make something that used A LOT of them!

In combing through Pinterest, I found lots of bottle cap craft inspiration. The ones that used the most were tables, so that’s what I set off to make for him.

Here is a list of the items I needed to cover a 2’x3′ table:

• 1 small table
• Lots of bottle caps (I used 486 for a 2′ x 3′ table)
• 1″x2″ wood strips for trim
• 2″ wood nails
• Wood filler
• Aluminum foil
• 16oz Gorilla Glue
• 2 quarts ready-mixed grout
• 2 quarts of pre-mixed epoxy resin
• Sandpaper
• Large grout sponge
• Grout float
• Bucket filled with warm water
• Newspaper to catch the drips
• A well-ventilated, minimally dusty room in which to work
• At least 3 days to allow for curing time (in other words, don’t start this on Christmas Eve!)

I found a sturdy, basic little table at a local thrift shop. It had a cluster of tiny princess and heart stickers stuck to the top, which I decided to just leave since I didn’t require a perfectly smooth surface.

I started by separating the caps by color, then laying them out to see what type of pattern I could make given the colors and quantities I had. Once I figured it out, I removed the caps, placing them in cups by color.

In order to make the grouting and lacquering easier, I added a rim to the edge of the table by nailing on some 1″x2″s that I had cut to size.

Because the table had rounded edges, and I am not skilled or patient enough to cut the trim to fit, there was a gap that had to be filled.

I improvised by stuffing in some tightly wadded aluminum foil into the corner to fill in the space.

Then I filled in all of the gaps with wood filler to prevent any grout or lacquer from seeping through. Once the wood filler was dry, I sanded it and removed any loose pieces.

Next, I glued the caps into place starting from the outside. I used Gorilla Glue, which worked well. It provides a strong hold, but doesn’t dry instantly, so you can adjust the caps as you work. You don’t need to use a lot per cap, just a few drops. Once I had glued down all of the caps, I let it dry overnight. The instructions say it is 80% dry in 2 hours, but fully cured in 24.

Next, I grouted the caps to give it a tiled effect. Using a grout float, I carefully worked the grout in and around the bottle caps, making sure there were no gaps. I then used the float to smooth the top to make it even and to the point where the caps were just visible. I then used the dampened sponge to wipe across the grout until the bottle caps were visible and the grout was even. It took a lot longer, and required more patience than I had anticipated! I then let it sit for 24 hours.

Finally, I covered the entire surface with epoxy resin, making sure to fill in all gaps. I again let it sit overnight. While not perfect, I was very happy with the results!

Advertisement

Introducing Herban Crafts: Crafting a Better World!

Karen Lee of EcoKaren and I have partnered on a new social enterprise, Herban Crafts, that will offer a job and social skills training program to unemployed women in transitional housing in the DC and NY areas. To support our programming, Herban Crafts will sell DIY kits for various types of earth-friendly products. The kits will be manufactured, in part, by the trainees as part of their job skills training.

The first set of kits will teach people how to make their own organic bath and body products, and we will be adding additional types of kits in the future. We believe teaching people how to make their own products is empowering, and we also see it as an opportunity to teach people about the importance and joys of working with organic, fair trade, recycled and repurposed materials.

Our mission is multi-fold: to promote self-sufficiency while also supporting the health and wellbeing of people and the planet; and to help address the problem of unemployment, a contributing factor to homelessness, by offering a hands-on job and social skills training program for unemployed women living in transitional housing.

You can find more information about the company and our mission on our IndieGoGo campaign page where you can also pledge to help fund our initial production of kits. Suggested donations start at just $5.00, and there are lots of great rewards for our sponsors! And if this is something that you believe in as much as we do, please help spread the word to your friends on social media and via e-mail. And we hope you will follow us on Facebook, Twitter, and Pinterest for updates!

For an idea of our overall mission and plan, you can view our presentation from the 2012 Global Health and Innovation Conference held at Yale University on April 22, 2012.

Herban Crafts Global Health & Innovation Conference 2012

Miss Wonderful and Other Finds at Ginger Root Design

stylish vintage black patent pumps

On a recent shopping trip, I discovered a shop that I hadn’t noticed before. Ginger Root Design, at 1530 U Street, NW has a small, but excellent selection of vintage clothing. They also carry eco-friendly clothing and accessories by ReVamp for men and women that have been fashioned out of repurposed fabrics and notions. The owners of Ginger Root design, Erin Derge and Kristen Swenson, have a passion for sewing, so they offer tailoring and sewing classes. On my recent visit they showed me a cute little bow accessory made from repurposed men’s ties.

best shoe brand name ever!

The first thing that caught my eye was a pair of cute black patent leather pumps with a bow and interesting cut-out design. Because my feet are petite, I don’t easily find shoes that fit (which is a good thing as far as keeping a shoe addiction at bay), so I was thrilled when they turned out to be my size. The owners scored the shoes at an estate sale in Minnesota, from whence they hail. The shoes were unworn and in the original (awesome) box.

image copyright ReadysetDC

While I didn’t have time to thoroughly peruse their store, I did spot several cute women’s items that were fashioned out of a variety of great fabrics, and I plan to go back there soon for a real visit.

For more information on their hours and contact info, or for news on their classes and latest items, you can visit the ReVamp Facebook page or follow them on Twitter.